Taurox 120 Скачать руководство пользователя страница 10 | Manualshive

Страница: 10 / 60

background image

300 / 400 / 900

10

Danger

1 Safety instructions

1.1 General information

The device complies with the applicable safety regulations and standards. Special attention
has been paid to the safety of the user.

For the user are additional valid the:

•

Relevant accident prevention regulations,

•

General accepted safety related norms,

•

EG-norms or other country specific regulations.

1.1.1 Usage as agreed upon

The intended use includes the procedure according to these operating instructions. The
device may only be operated within the limits of the specified data.
(see chapter: "Technical Data").

1.1.2 Usage other than agreed upon

To use the machine in different ambient conditions as mentioned in the chapter “Operation
conditions” ask the manufacturer.

1.1.3 Modifications and alterations

Based on security reasons it is not allowed to do alterations and changes at the machine and
its functions.
Changings at the machine which are not allowed by the manufacturer are followed by the
exclusion of liability to the company

Taurox e. K.

1.1.4 Repairs and servicing

It is not allowed to repair the machine by the user. The machine has no parts which can be
repaired by the user.
The machine has to be send to

Taurox e. K.

for repair.

1.1.5 Decommissioning and disposing

For the decommissioning and the disposal, the environment regulations are valid of the
country the user company is placed.

1.2 Ensure your own safety / emergency stop

•

Disconnect the machine of the power supply system before starting

maintenance work. This avoids accidents based on electrical voltage and
movable parts.
Please see chapter „ Residual dangers “

•

It is not allowed to override or avoid protection- and safety devices like

protection cover and machine cover parts or thermic protection switches,
emergency stop switch and motor switch.

•

Dismantled protections like i.e. machine cover, fuses, emergency stop

switch, motor protection switch, have to be reinstalled and to be checked
for a proper function.

•

The Operating panel with emergency stop switch and motor switch has to

be installed in a convenient distance of the user!

«
...
8
9
10
11
12
...
»

Содержание 120





























































Отзывы:

Нет отзывов

Похожие инструкции для 120

Бренд: Makita Страницы: 12

Бренд: Cal Flame Страницы: 28

Бренд: Magikitch'n Страницы: 16

Бренд: Dickinson Страницы: 8

Бренд: Skil Страницы: 140

Бренд: Char-Broil Страницы: 28

Бренд: Ferm Страницы: 32

Бренд: Uberhaus Страницы: 52

Бренд: Graphite Страницы: 140

Бренд: Truper Страницы: 20

Бренд: Master Forge Страницы: 38

Бренд: Hougen Страницы: 15

Бренд: Hitachi Страницы: 29

Бренд: Hitachi Страницы: 33

Бренд: Hitachi Страницы: 40

Бренд: Hitachi Страницы: 52

Бренд: Hitachi Страницы: 20

Бренд: Hitachi Страницы: 48

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды