User Manual (English version)_V2.0
1
※
Notice Information
I.
Intended Use
Tatung intelligent Motor Sensor (hereinafter, referred to as
“TiMS”) is the first IoT smart sensor
developed especially for low-voltage induction motors. Based on the all-in-one sensor module
technique, hybrid-wireless transmission structure and easy installation design, TiMS can easily
apply to all types of motor and various applications.
TiMS can measure motor data and monitor the motor operating status. After scanning the motor
status, all the data are stored in TiMS memory and transmitted to the smart handheld devices
(such as smartphones and tablets) or gateway via Bluetooth
®
Low Energy or Low Power Long
Range wireless transmission structure. By Tatung Cloud data analysis, customer can both save
equipment maintenance costs and extend equipment life cycle. To achieve Industry 4.0 will be
easier.
II.
General and Safety Instructions
A.
Introduction
＊
This instruction manual contains information for installation, operation, and maintenance
of TiMS. To ensure that the sensor unit will ececute proper functions and have long
lifetime, carefully study this manual and other related documentation before taking any
action.
＊
The instructions in this manual can only be implemented by trained personnel with
appropriate experience and with the authorization of the equipment owner.
＊
This document and parts thereof must not be reproduced or copied without the express
written permission of Tatung company, and the contents thereof must not be imparted to
a third party nor be used for any unauthorized purpose. Tatung company strives to further
improve the quality of the information it provides in its publications and will welcome any
suggestions for improvements to this manual.
＊
These instructions must be followed to ensure safe and proper installation, operation and
maintenance of the solution. They should be brought to the attention of anyone who
installs, operates or maintains this equipment.
＊
Ignoring the instructions will invalidate the warranty.
B.
Safety
＊
The motor must be disconnected from the power supply and be completely stopped
before conducting any installation or maintenance procedures. Additional measures
should be taken to avoid accidental motor starting.
＊
Professionals working with electrical installations, either in the assembly, operation or
maintenance, should use proper tools and be instructed on the application of standards
and safety requirements, including the use of personal protective equipment that must be
carefully observed in order to reduce risk of personal injury during these services.
＊
Electric motors have energized circuits, exposed rotating parts and hot surfaces that may
cause serious injury to people during normal operation. It is recommended that
