User Manual (English version)_V2.0
23
5.6 Sensor Initial Setting
Step 1.
Click the new sensor and set the motor information to save it.
NOTE
Before setting the motor information, the user still does nothing to the
sensor. The sensor name color in dark is a normal status in this process.
While TiMS App in process, the network connection should be assured.
Finger icon [ ] means click position.
For the initial use of the sensor, it will enter the Motor Information
setting page at the beginning. After key in all the required
information, click [
SAVE
] to finish setting.
[
TiMS NAME
] indicates the name shown on App & TiMS website.
It can be changed.
NOTE
1.
the * mark indicates the required information.
2.
User can change the motor information from
monitoring system website.
