User Manual (English version)_V2.0
9
2.4 Sensor Installation and Setting Tools (not included in the package)
(1) Small strong magnet such as
Neodymium magnet (NdFeB magnet)
(2) Phillips screwdriver
(3) Hexagon key (No. 4)
(4) PU plastic gloves (for epoxy putty mixing)
(5)
Cleaning objects such as cleaning naphtha, rag, fine sandpaper…etc. (for cleaning the
position to install the sensor on the motor frame)
2.5 Sensor Installation Instructions
(1)
Recommended installation position
：
The central position of the frame at the height of shaft, i.e., the level parallel to the ground.
(shown as below)
(2) Fixing by epoxy putty
：
X axis
Y axis
Z axis
