Advanced SmartAire S and PowerAire S
Controller Guide
Tate’s SmartAire and PowerAire S units are factory configured for
optimal performance in a typical data center environment. The
installation of these units in most data center space will result in ideal
performance without any user intervention.
Some sites however have differing requirements, and the application
of SmartAire and PowerAire S units may not be ideal based on a
number of site conditions. These requirements have prompted Tate
to publish an advanced guide to the SmartAire and PowerAire S
controllers which will allow the expert user more precise control over
the functionality of Tate’s product
.
This document is intended to be only a guide to the operation of the
embedded controller. The user takes full responsibility when
adjusting the default parameters set in all PowerAire and SmartAire
S units when they leave our factory. Adjusts to these parameters
may result in undesirable operation of the units, as well as decrease
the life expectancy of the units themselves. It is suggest that only
those users with a high level of experience in control methodology
attempt to make these changes without direct consultation with
Tate’s data center product management team
.
Please feel free to contact Tate with any questions regarding this
operations guide.
Please Help Us Improve This Guide
We would be very interested to hear any comments you might have
on this new guide. We are particularly interested in learning of
omissions or subjects that are unclear. Please call, fax, or e-mail and
direct your comments to Technical Service. Thank you very much for
your assistance.
Phone: (410) 799-4200
Fax: (410) 799-4207
E-Mail: [email protected]
R1 11/14/2011
