EN
4
• Avoid causing damage on power cable
when transporting the refrigerator.
heavy objects on power cable. Do not
touch the plug with wet hands when
plugging the product.
• Do not plug the refrigerator if the wall
outlet is loose.
• Water should not be sprayed on inner or
outer parts of the product for safety
purposes.
• Do not spray substances containing
explosion risk.
on top of the refrigerator; in the event of
spillages, this may cause electric
• Do not overload the refrigerator with
food. If overloaded, the food items may
fall down and hurt you and damage
refrigerator when you open the door.
• Never place objects on top of the
refrigerator; otherwise, these objects may
fall down when you open or close the
refrigerator’s door.
• As they require a precise temperature,
vaccines, heat-sensitive medicine and
be kept in the refrigerator.
• If not to be used for a long time,
refrigerator should be unplugged.
A possible problem in power cable
• The plug’s tip should be cleaned
regularly with a dry cloth; otherwise,
• Refrigerator may move if adjustable legs
Properly securing adjustable legs on the
• When carrying the refrigerator,
do not hold it from door handle.
Otherwise, it may be snapped.
• When you have to place your product
next to another refrigerator or freezer,
the distance between devices should be
at least 8cm. Otherwise,
• The product shall never be used while
the compartment which is located at the
top or back of your product and in which
electronic boards are available
(electronic board box cover) (1) is open.
1
For products with a water dispenser;
-Pressure for cold water inlet shall be
maximum 90 psi (6.2 bar). If your water p
ressure exceeds 80 psi (5.5 bar),
use a pressure limiting valve in your mains
system. If you do not know how to check
your water pressure, ask for the help
of a professional plumber.
• If there is risk of water hammer efffect
in your installation,always use a water
hammer prevention equipment in your
installation.Consult professional plumbers
is you are not sure that there is no water
hammer effect in your installation.
• Do not install on the hot water inlet.
Take precautions against of the risk of
freezing of the hoses.Water temperature
operating interval shall be 33°F (0.6°C)
minimum and 100°F (38°C) maximum.
• Use only potable water.
