15
Once activation is successful, click on the “Connect” button and start surfing
Un-installation of Application Software
1. Exit Management procedures.
2. Open “uninstall TATA Dialer”, click “OK” >“OK”.
Installation Procedure for Linux
Before proceeding further make sure you have wvdial installed on your laptop/desktop. If not then
install it by writing apt-get install wvdial
in terminal. (You need internet connection for it)
Now plug in your modem in USB port. On inserting you will notice icon of VME101 on your desktop
screen, right click on it and
eject it
.
1.
In terminal write the following command:
$sudo lsusb
Sometimes it need to input the password for sudo, such as
[sudo] password for ***:
Please input it, then it should has similar information as follows:
Bus 002 Device 002: ID 201e:2009
Here the 201e:2009 is very important; it corresponds to the VID&PID of the data card.
2.
Now it should load the proper module to let the kernel know the device. Please do as follows:
Содержание Olive VME101
Страница 1: ...Olive VME101...
Страница 12: ...12 Click Continue then install Then enter your laptop s password when pop up window appears...
Страница 13: ...13 When installation is successful click on close button After clicking on close Dialer opens...
Страница 19: ...19 4 Select Forward again without changing anything from drop down box...
