TATA Motors Nexon EV 2003, Руководство пользователя, Страница: 154 / 308

OPERATING of LIGHTS and
WIPERS
Combi-switch
(
RH Stalk)
1. Left Turn Signal
Move the lever fully upward.
2. Right Turn Signal
Move the lever fully downward.
3. High Beam
Move the lever forward to select the high
beam function. Pull the lever back to nor-
mal for low beam.
4. High Beam Flash (Spring Return)
To flash the high beam, pull the lever to-
wards you from the normal position. It will
return to its normal position when you re-
lease it.
5. Headlamp Rotary Switch
OFF Position
All lamps will remain ‘OFF.’
Parking Lamp
Rotate stalk to turn ‘ON’ the Parking
lamps.
Low Beam
Rotate stalk to turn ‘ON’ the Low Beam
function.
Auto Light
The headlights will be automatically
switched ON depending on ambient light
conditions (while entering a tunnel or when
it is twilight).
Day Time Running Lamps (DRL)
Day time Running Lamps
(DRL) are used to increase
the visibility of the vehicle to
other drivers during daytime.
1. To activate and deactivate DRL, keep
the ignition switch is ‘ON’ position and
switch the parking lamp ON-OFF twice
within approx. three seconds.
2. Activation and Deactivation of DRL can
be done by DRL soft switch, which is avail-
able on the Head Unit Display.
6. Lane Change Signal
To signal a lane change, move the lever
slightly up or down to the point where the
turn signal light begins to flash, but the
lever does not latch. The turn signal will
flash six times automatically.
NOTE
When the turn is completed, the signal
will cancel and the lever will return to its
normal position.
STARTING AND DRIVING
145