TATA Motors ALTROZ BS VI 2021, Руководство пользователя

Страница: 173 / 248

JUMP STARTING YOUR CAR
For Diesel, Petrol NA & TC Non
IAC/ISS Variants
Use only a battery of same rating & capac-
ity to jump start your vehicle. Position the
booster battery close to your vehicle so
that the jump leads will reach both batter-
ies.
When using a battery of another vehicle,
do not let the vehicles touch. Apply the
parking brake firmly and keep the gearshift
lever in neutral.
Turn off all vehicle accessories, except
those necessary for safety like hazard
warning lamps.
If your vehicle is equipped with Battery
sensor, then do not connect your jump
start cable lead directly on the Sensor sur-
face. Connect only on the negative cable
surface as shown on the image. After jump
start event, IAC function will be restored
only when the Vehicle is parked in idle for
3-4 Hours.
(For Diesel & Petrol)
Make jump lead connections as follows:
Connect one end of the first jump lead •
to the positive (+) terminal of the dis-
charged battery.
Connect the other end to the positive
•
(+) terminal of the booster battery.
Connect one end of the second jump
•
lead to the negative (–) terminal of the
booster battery.
Make the final connection (other end of
•
the negative terminal) to an unpainted,
heavy metal part (i.e. engine mounting
stud/nut) of the vehicle of discharged
battery.
Start the engine of the vehicle with the •
discharged battery.
Before disconnecting the jumper ca-
•
bles, let the engine run for sever-al
minutes.
If the booster battery you are using is
•
fitted to another vehicle, start the en-
gine of the vehicle with the booster bat-
tery. Run the engine at moderate
speed.
Remove the jump leads in the ex-act
•
reverse order in which you connected
them.
EMERGENCY AND BREAKDOWN ASSISTANCE
165