TATA Motors ALTROZ BS VI 2021, Руководство пользователя

Страница: 113 / 248

ELECTRONIC TEMPERATURE
CONTROL (ETC) (if available)
Air Distribution Mode -Center and side 1.
Air Distribution Mode- center, side and 2.
foot well
Air Distribution Mode -foot well
3.
Blower Speed Control 4.
AC ON/OFF Switch 5.
Air Distribution Mode- defroster & foot 6.
well
Air Distribution Mode - Defroster
7.
Fresh / Recirculation air mode 8.
OFF Switch 9.
1. Air Distribution Mode -center And
Side
This is to select the air distribu-
tion pattern directs air through the
center and side air vents.
2. Air Distribution Mode Center, Side
And Foot Well
This is to select the air distribu-
tion pattern directs air through
the center and side and foot well air vents.
3. Air Distribution Mode -foot Well
This is to select the air distribu-
tion pattern directs air through
the foot well air vent.
4. Blower Speed Control
Press the Blower Speed control down but-
ton to decrease the blower speed
and press the blower speed control up but-
ton
for increase the blower speed.
5. Ac On/off
Press the button to switch
ON/OFF the AC. The indica-
tor lamp in the button will
light up when AC is ON.
When AC is switched ‘ON’, engine idling
RPM increases marginally to adjust the AC
compressor load.
When desired temperature is achieved Ac
compressor will self-displace optimum re-
frigerant flow.
NOTE
The AC can be switched ‘ON’ only if the
blower is ‘ON’ and engine is running.
NOTE
Condensate may drip from the un- •
derside of the vehicle when it is in
cooling mode. Traces of water on
the ground are normal and are not
a sign of leakage or malfunction.
Ventilate the vehicle for a brief pe- •
riod during warm weather. This will
CLIMATE CONTROL
105