TasmanEco Aspley Cot, Инструкции по сборке и уходу

Страница: 8 / 12

8
x12
Conversion is now complete
Converting the cot into a junior bed
1. To convert your Tasman Eco cot into
a junior bed, begin by loosening all the
connector screws around the cot. (12 in total)
2. Remove the connector screws from the front
and rear panels. Store these parts in a safe place.
3. Gently spread the side frames apart and
carefully remove the front and rear panels.
5.
Fit the small cap screws to the unused
locating holes (6 on each bed head). This is
a required safety step to prevent the entry of
small fingers into these holes.
4. Retighten all the connector screws between
the bed heads and base. (Do not overtighten).
To prevent damaging the finish of your cot, we recommend
these steps are best undertaken by two people.