6
7
Step 4 -
Step 5 - Tighten all connector screws
Assembly is now complete
To complete assembly,
tighten all connector
bolts around the cot.
but do not overtighten.
Attached side panels to cot ends
8 x 60mm connector bolts x 8
Hardware needed
Secure side panel to cot ends using 8x60mm connector bolts.
Assembly overview
Parts List
Hardware List ( Bassinet kit )
Bassinet -
Assembly
M6 x 60 Bolts x 8
Self Tapping Screw
x4 Brackets x 4
M6 x 15 Cap Bolt
x
8
Bassinet Base x 1
Small parts can present a choking hazard.
Always keep small parts out of reach of children
both during and after assembly. Store any spare or unused parts in a safe place.
Warning
We recommend tightening all screws and connectors by hand. If using a cordless driver, set the
speed to a slow setting and the clutch to a low setting to prevent execessive tightening that may
result in damage to your furniture.
Recheck tightness
Re-tighten all connector screws (at least two months after assembling the cot), as some connectors
may loosen as the
Periodically check all of the connector screws, making sure they are tight.
cot settles.
Optional baby bassinet kit
End panels x 2
Corner Post x 4
Extension panel
x 4
4 x double ended cap bolts
Tighten the bolts firmly
