Tasman Networks 1002, Руководство по установке

Страница: 12 / 78

12 CHAPTER 1
About This Guide
Organization
Installation Guide: 1002 and 1004 Routers
TiOS 8.0
Organization
The following tables describe the content and organization of this guide.
Table 1 Guide Organization: Chapters
Chapter Description
1 About This Guide - defines the user audience, and describes the organization of this guide, use of
special notices, and other Tasman Networks user guides.
2 Product Introduction - provides a description of installation site requirements, and cables and
tools required for installing the Tasman Model 1002 and Model 1004 router.
3 Installation - describes the system front and back panels and how to install the Tasman Networks
Model 1002 and Model 1004 router. Information is also provided about the operator interface,
network cabling, and the operator interface.
4 Configuration - describes system configuration, logging in, factory defaults, changing the default
password, upgrading software, and the boot process.
5 Troubleshooting - provides information about network indicators, tests, and general
troubleshooting tips. A summary of common problems and solutions is also included.
Table 2 Guide Organization: Appendices
Appendix Description
A Specifications - lists the electrical, physical, and networking characteristics of the Tasman
Networks Model 1002 and Model 1004 router. Cable pinout and related MIB file information is
also provided.
B Compliance and Standards - provides regulatory information and compliance information
applicable to the Tasman Networks Model 1002 and Model 1004 router.