Introduction
Infineon TC234LF Emulation Adapter primary use case is providing the trace capability for the
100-pin:
·
TC233
·
TC223
devices featuring no trace functionality.
The Emulation Adapter might differ in some peripherals from the target device; there-
fore, the device datasheet should be checked.
The Emulation Adapter is based on the emulation device featuring on-chip trace and provides
the target adaptation to the 100-pin QFP target package. Infineon TC234LF Emulation Adapter
is based on the TC234LF emulation device (step AB) in the QFP100 package, on which the on-
chip trace buffer is available providing the trace support.
Alternative use cases is a
without connecting the emulation adapter to
the target. In this case application development and testing can start before the target is avail-
able.
The iC5000 or the iC5700 BlueBox providing the trace functionality connects to the Emulation
Adapter through the Infineon 10-pin 1.27mm Infineon DAP2 Wide Debug Adapter (ordering code
IC50163-2).
Complete Emulation Adapter is split into individual parts. A typical setup in conjunction with the
target contains:
·
IEA-TC234LF-ST (Microcontroller part)
·
Conversion board
·
Solder part
More information about our products on