Schematics
To view Emulation Adapter schematics, use the short link isystem.com/schematics.
Below is a pinout of the four connectors P3-P6 on the bottom side of the emulation adapter:
NC – Not Connected
Connectors expose only signals from the 144-pin emulation device, which exist on the 100-pin
TC233 device. Green colored pins depict pins where pin numbering stops being continuously in-
cremented by one.
Optionally, the target can be custom designed in a way directly providing connection for the
emulation adapter through the P3, P4 and P5 connector. This way a high quality electrical and
mechanical connection is established. Connectors being used on the emulation adapter side are
TE connectivity female connectors, part number: 0-0104652-4 (40-pin connector). The target
must feature male matching connectors. Contact iSYSTEM for technical details on the location
of the three connectors.