10
Important! Switch the machine off when you:
• e.g. carry out cleaning or maintenance work, or convert the machine to
another function
• store it in a suitable room to avoid any unauthorised use of the unit
• leave it standing without supervision
To do so, disconnect the power supply cord from the wall socket and stop the
machine from rolling away (e.g. by fixing a wedge).
Store the machine in a dry, dust-free room with a corrosion-free atmosphere.
The temperature must not fall below +10 °C or 35 °C. Low
temperatures, damp and dust can significantly reduce the service life of the
electrical components.
EU Declaration of Conformity
We
JohnsonDiversey Switzerland
CH-9542 Münchwilen
hereby declare that the product described below both in this basic design and
construction and in the version marketed by us conforms to the relevant safety-
and health-related requirements of the appropriate EU Directive.
This declaration shall cease to be valid if modifications are made to the product
without our approval.
Applicable EU Directives:
Machinery Directive (98/37/EEC) in version 98/79/EEC
Low-Voltage Directive (73/23/EEC)
EMC (Electro Magnetic Compatibility) (89/336/EEC) in version 98/13/EEC
Harmonised standards applied:
IEC 60 335-1(ed.4)/IEC 60335-1-A1/IEC 60335-2-67 (ed.3)/
IEC 60335-2-67-A1/IEC 60335-2-69 (ed.3)/IEC 60335-2-67-A1/EN 55014-1/
EN 55014-1-A1/EN 55014-1-A2/EN 55014-2/EN 55014-2-A1/
EN 61000-3-2/ EN 61000-3-2-A2/EN 61000-3-3/EN 61000-3-3-A1/
EN 61000-3-3-A2/EN 50366/EN 50366-A1
It is ensured through internal measures that series-production units conform at
all times to the requirements of current EU Directives and relevant standards
The signatories act on behalf of company management and with full power of
attorney.
Overview
1
Dosing cup
2
Filling level (max.)
3
Emptying hose for recovery tank (red cap)
4
Drain opening
5
Dirt sieve
6
Recovery tank
7
Recessed grip
8
Brush unit
9
Tools (brush, pad drive, etc.)
10
Solution tank filter
11
Manual solution flow adjustment
12
Solution tank
13
Emptying hose for solution tank (blue cap)
14
Machine handle
15
Operating lever (brush drive)
16
Adjusting lever for the inclination of the machine handle
17
Vacuum air filter
18
Float (overfilling protection for recovery tank)
19
Hour counter (optional)
20
Suction unit height adjustment
21
Squeegee support wheel height adjustment
22
Squeegee lowering device
23
Squeegee settings
24
Squeegee
25
Pedal brush unit (optional)
26
Solution switch
27
Vacuum switch
28
Main switch
The tank cap must be closed when moving or driving the machine.
Product:
scrubber dryer
Name:
swingo 450E
Model:
CO450.0 (230-240V~/50Hz/1500W)
Dipl. Ing. (FH) D.Windmeisser
Dipl. Ing. (FH) P. König
2
8
9
10
5
11
6
12
7
13
15
16
17
18
max.60
˚
C
max.140
˚
F
14
1
3
4
max.60
˚
C
max.140
˚
F
max.60
˚
C
max.140
˚
F
26
27
25
28
21
22
23
24
20
19