Taski CO150.5, Перевод оригинальной инструкции по использованию, Страница: 6 / 10

30
Filling water
Dosage:
Only use chemical products recommended by the manufacturer.
The dosing aid is marked for a 1% cleaning solution.
Dosing example:
Beginning work
Caution:
Maximum permissible water temperature 35 °C/95 °F.
• Remove the tank from the machine by pulling
on the tank unlocking device (1).
Hold the tank (2) with your other hand so that it
does not fall out of the holder when unlocked
and pull the solution tank out of the holder.
• Remove the dosing lid. The dosing lid can be
removed from the filter housing by turning it to
the left.
• Fill the solution tank up to the marking.
• The marking is indicated by a label on the side
of the solution tank.
Caution:
Wear protective gloves, goggles and the corresponding
(protective) work clothing when handling chemical products!
Caution:
Do not use any products that produce foam. Read the
instructions on the sticker on the front side of the tank.
Dosage Tank capacity Dosing aid
1% MAX 1 x MAX
2
1
1
2
M A X
WATER LEVEL
LIVELLO ACQUA
WASSER NIVEAU
NIVEAU DE L`EAU
NIVEL DE L`AGUA
Temperature
+5°C + +35°C
+41°F + +95°F
M A X
WATER LEVEL
LIVELLO ACQUA
WASSER NIVEAU
NIVEAU DE L`EAU
NIVEL DE L`AGUA
Temperature
+5°C + +35°C
+41°F + +95°F
• Use the dosing lid for the dosing. The dosing lid
can be removed from the filter housing by
turning it to the left.
• Fill the dosing lid with detergent up to the
indicated mark (26 ml =1%).
Empty the contents of the dosing lid into the
solution tank.
• Screw the dosing lid back into the cutout
provided.
Ensure that the dosing lid is screwed in exactly
as shown in the illustration. The Taski lettering
must be below. Only in this way will the ribs on
the dosing lid fit into the cutouts provided in the
tank.
• Place the filter housing on the tank and lock it.
Ensure that the filter housing is lying correctly
on the tank. The locking pattern on the front side
of the tank is intended to ensure this. (see the
detail in the illustration)
The tank could open during the cleaning .
• Replace the tank (1) in the machine until it locks
into place, and then press in the tank locking
device (2) again.
Caution:
Before starting the cleaning operation, ensure that there are no
objects such as metal bits, screws, etc. lying on the floor.
These object copuld be vacuumed up and thereby damage the
machine!
• Plug the power supply cord into the mains socket.
• Press the main (ON/OFF) switch to turn the
machine on (switch lights up)
• Hold the machine firmly by the handle and bring
it into nthe working position (2) by pressing the
red foot pedal (1).
The electric brushes turn on
.
1
2
- 1% / 26ml -
- 1% / 26ml -
TASKI
1
2
1
2