©Copyright Task Force Tips, Inc. 2011-2012
LIA-520 April 25, 2011 Rev01
8
4.0 INSTALLATION & CONFIGURATION
4.1 VALVE STORAGE BRACKET INSTALLATION
A storage bracket is available for the Hydrant Master. The valve can be stored with hose pre-connected to the inlet and/or outlet
of the valve. The storage bracket can be mounted vertically or horizontally as shown with the included self-tapping stainless steel
screws. The bracket requires 12.5” x 11.1” (317.5mm x 281.9mm) of panel space.
To purchase a bracket, order TFT part number AU-BRACKET.
4.2 HANDHELD REMOTE CONTROL STORAGE BRACKET INSTALLATION
The storage bracket for the handheld remote control is supplied with (3) ¼-20 stainless steel self-tapping screws. Make sure the
area on the backside of the mounting surface is clear of obstructions. A minimum thickness of 3/32” (.093” – 2.4mm) in aluminum
or 5/64” (.078” – 2mm) in steel is recommended. See the chart below to determine the correct pilot hole size.
Select proper location for mounting storage bracket. Panel space required will be 6.0” x 11.2” (152 x 285mm). Refer to graphic
below for dimensions. Bracket can be used as a template. Be sure spring is in position.
5"
[127mm]
6"
[152mm]
Drill (3) Pilot Holes (refer to hole size chart)
Mount Bracket with (3)
(be sure spring is in position)
1/4-20 Self-Tapping Screws.
Tighten Securely.
SPRING
Material
Hole Size
Use
Material
Hole Size
Use
Thickness
Inches
mm
Drill
Thickness Inches
mm
Drill
5/64-3/32
.206
5.2
#5
3/32
.213
5.4
#3
1/8
.213
5.4
#3
1/8
.221
5.6
#2
3/16
.221
5.6
#2
3/16
.228
5.8
#1
ALUMINUM
STEEL
Hole Size Chart For Self Tapping Screws
