background image

FCC Note:

This  equipment  has  been  tested  and  found  to 

comply  with  the  limits  for  a  Class  B  digital  device, 

pursuant to Part 15 of the FCC Rules. These limits are 

designed  to  provide  reasonable  protection  against 

harmful interference in a residential installation. This 

equipment  generates,  uses  and  can  radiate  radio 

frequency  energy  and,  if  not  installed  and  used  in 

accordance with the instructions, may cause harmful 

interference  to  radio  communications.  However, 

there is no guarantee that interference will not occur 

in  a  particular  installation.  If  this  equipment  does 

cause  harmful  interference  to  radio  or  television 

reception, which can be determined by turning the 

equipment off and on, the user is encouraged to try 

to  correct  the  interference  by  one  or  more  of  the 

following measures:

· Reorient or relocate the receiving antenna.

· Increase  the  separation  between  the  equipment  and 

receiver.

· Connect the equipment into an outlet on a circuit  

  different  from  that  to  which  the  receiver  is 

connected. 

· Consult  the  dealer  or  an  experienced  radio/TV  

  technician for help.

Shielded  interface  cable  must  be  used  with  the 

equipment  in  order  to  comply  with  the  limits  for  a 

digital device pursuant to Subpart B of Part 15 of FCC 

Rules.

Specifications  and  designs  are  subject  to  change 

without any notice or obligation on the part of the 

manufacturer. 

ONE YEAR LIMITED WARRANTY

Congratulations on the purchase of your new Tasco product. You have chosen one 

of the finest values available today. This product carries Tasco’s

 ONE YEAR LIMITED 

WARRANTY. 

This  product  is  warranted  against  original  defects  in  material  and/or 

workmanship for the length of time specified by this warranty, provided, however, 

that  the  unit  has  not  been  abused,  taken  apart  or  tampered  with  in  any  way 

whatsoever.

This warranty is limited to the original purchaser and is not transferable. 

This warranty 

applies only to products purchased in the United States of America. 

Any return 

made under this warranty must be accompanied by the items listed below: 

1) A check/money order in the amount of 

$10.00

 to cover the cost of 

postage and handling 

2) Name and address for product return 

3) An explanation of the defect 

4) Proof of Date Purchased 

5) Product should be well packed in a sturdy outside shipping carton to 

prevent damage in transit, with return postage prepaid to the address 

listed below:

 

SEND TO:  

TASCO

 

  

Attn.: Repairs   

 

 

 

 

 

8500 Marshall Drive  

 

 

 

Lenexa, Kansas 66214  

 

Tasco  shall  not  be  liable  for  any  consequential,  incidental  or  contingent  damages 

whatsoever. Some states do not allow the exclusion of incidental or consequential 

damages, so the above limitation or exclusion may not apply to you. This warranty 

gives you specific legal rights, and you may have other rights which vary from state 

to state. 

Non-warranty repairs or refurbishing of your Tasco product are always provided at a 

reasonable cost. 

For products purchased outside the United States please contact 

your local dealer for applicable warranty information.

©2010 B.O.P   Tasco, TM, ®, denote trademarks of B.O.P

Содержание 119203C













Отзывы: