TASCAM SS-CDR250N / SS-R250N
103
16 – Messages
The following is a list of messages that appear in pop-up windows.
Refer to this list if one of these pop-up messages appears on the SS-R250N/SS-CDR250N and you want to check the meaning or deter-
mine a proper response.
Message
Meaning
Note
Backup REC is not available.
(MM is not available)
Backup recording is disabled because the medium cannot
be used.
MM
= SD1, SD2 or USB
Backup REC is not available.
MM formatting not optimal
for Recording.
Backup recording is disabled because the medium has not
been formatted by this unit and cannot be guaranteed to
properly record.
Format it with this unit before use.
MM
= SD1, SD2 or USB
Cannot add timer event.
Timer event limit reached.
The limit has been reached so no more timer events can be
added.
Cannot change while playing.
This setting cannot be changed during playback.
Cannot change while recording.
This setting cannot be changed when recording.
Cannot Copy.
"ffffffff"
already exist in current folder
You tried to copy a file to the current folder.
The current folder, however, already contained a file with
the same name as the file being copied.
ffffffff
= file name
Cannot Copy File.
"ffffffff"
already exist in Destination.
The selected file already exists in the copy destination, so it
cannot be copied.
ffffffff
= file name
Cannot Copy Folder.
"ffffffff"
already exist in Destination.
The selected folder already exists in the copy destination, so
it cannot be copied.
ffffffff
= folder name
Cannot Copy for Insert.
"ffffffff"
already exist in current Fold-
er.
The selected file already exists in the current folder, so it
cannot be inserted.
ffffffff
= file name
Cannot Copy.
Source folder and
Destination folder is same.
The copy source folder and destination folder are the same,
so copying is not possible.
Cannot Copy.
Destination folder is
sub-folder of source folder.
The copy destination folder is a subfolder of the copy source
folder, so copying is not possible.
Cannot create new file/folder.
Media Full.
There is no open space on the medium, so a new file or
folder cannot be created.
Cannot create new mark point.
Mark point already exists
at the same timestamp.
You are trying to create a mark where one already exists.
A time position cannot have more than one mark.
Cannot edit this mark point.
Mark point already exists
at the same timestamp.
The market cannot be edited because another mark already
exists at that time.
Cannot Edit read-only file
The file is read only and cannot be edited.
Cannot execute combine.
Combine file size is over XXX.
The file size after combination would exceed 2 GB, so com-
bining is not possible.
Cannot execute combine.
Media Full.
The medium does not have enough open space so combin-
ing is not possible.
Cannot execute.
Media Full.
The medium does not have enough open space so execu-
tion is not possible.
Cannot increment Track
Interval is too short.
Either you pressed the RECORD [TRK INC] button within the
first 4 seconds of recording, or writing to the medium was
too slow, so starting to record a new track is not possible.
Cannot increment Track
System limit reached.
Please create new Folder.
The number of files in the folder or total number of files and
directories, for example, is too great, so starting to record a
new track is not possible.
Cannot make more than 1000
folders.
The maximum number of folders has already been reached,
so a new folder cannot be created.
Cannot RECORD
(Internal state error)
Recording cannot start for some reason.
If this occurs frequently, prepare
information about it including the
operation steps that cause it, and
contact the TASCAM customer
support service.
