Tascam Sonicview 16 Скачать руководство пользователя страница 110

Страница: 110 / 188

7 – Other module parameter setting screens

SENDS ON FADER function

The SENDS ON FADER function enables controlling SEND

levels with faders.

When in Sends On Fader mode, the SENDS ON FADER on the

top panel lights and the following operations are possible.

Using channel faders to control SEND levels from each

module to buses subject to SENDS ON FADER operation

Using the MASTER fader to control the FADER level

(bus master level) of buses subject to SENDS ON FADER

operation

In addition, the MUTE, SOLO and SEL keys and the color bar in

the top panel master section will become operation keys and

displays for the bus subject to SENDS ON FADER operation.

The SEND indicator will also light and the L/R indicators will

become unlit.

Sends On Fader mode can be activated and deactivated with

the following operations.

Top panel SENDS ON FADER key

USER KEY/FOOTSWITCH/GPIO-IN assigned to the Sends

On Fader function (See “USER DEFINED CONTROLS screen”

on page 38.)

NOTE

The Sends On Fader mode setting is assigned to the

following USER KEYS by default on the User Key page.

USER KEY 5-12 (Sends On Fader Mix1-8)

SENDS ON FADER screen

Select the buses subject to SENDS ON FADER operation on this

screen
Press the SENDS ON FADER key on the top panel to open this

screen.

Tap a bus selection button, highlighting it, to select that bus.

The channel faders will move to the positions of the SEND

levels from the modules to the selected buses. The MASTER

fader will move to the position of the FADER level of the

selected bus

To use SENDS ON FADER operation while, for example, the

Home Screen on the right touchscreen is open, tap the

icon at the top right of this screen to close it.

Tapping the icon will close this window, but Sends On

Fader mode will remain active. Press the SENDS ON FADER

key to open the SENDS ON FADER Screen again.

Press SENDS ON FADER key when the SENDS ON FADER

screen is open to end Sends On Fader mode. This will close

the SENDS ON FADER screen and return the channel and

MASTER faders, master section MUTE, SOLO and SEL keys and

color bar, L/R SEND indicators and channel screens to their

normal display states.

NOTE

This screen will not be shown for a MIX bus with BUS mode

set to GROUP.

110

TASCAM Sonicview 16/Sonicview 24

Содержание Sonicview 16





























































































































































































Результаты поиска

Содержание Sonicview 16

Отзывы:

Похожие инструкции для Sonicview 16

Бренды по названию

Популярные бренды

Tascam Sonicview 16, Справочное руководство

Результаты поиска

Содержание Sonicview 16

Отзывы:

Похожие инструкции для Sonicview 16

Бренды по названию

Популярные бренды