6 – Modules
MODULE menu
MODULE menu operations
o
Tap the button at the top right of the MODULE screen to
open the MODULE menu for the selected module.
o
Scrollbars appear when all selectable items cannot be shown
in the MODULE menu at the same time. In this case, drag the
menu up and down to scroll the items.
o
Tap the MODULE menu button or the button to close
the menu.
MODULE menu items
Menu item
Function
Copy MODULE
This copies all the parameter
setting values of the selected
module into a buffer.
Paste MODULE
This pastes all the parameter
setting values copied into the
buffer to the selected module.
UNDO Paste MODULE
This undoes pasting to the selected
module.
REDO Paste MODULE
This redoes pasting to the selected
module.
Copy INPUT
This copies all the parameter
setting values on the MODULE
(INPUT) Screen of the selected
module into a buffer.
Paste INPUT
This pastes all the MODULE (INPUT)
Screen parameter setting values
copied into the buffer to the
selected module.
UNDO Paste INPUT
This undoes pasting to the
MODULE (INPUT) Screen of the
selected module.
REDO Paste INPUT
This redoes pasting to the MODULE
(INPUT) Screen of the selected
module.
MODULE Library
Tap this area to open the LIBRARY
Screen for the selected module.
NOTE
i
The underlined words in the menu item list will be replaced
with the MODULE screen names of the selected module.
i
The menu items with underlined words are not shown on the
MODULE (OVERVIEW) and MODULE (OUTPUT) screens.
i
The following routing parameters cannot be copied or
pasted.
i
Input Routing
i
OSC Input
i
Output Port Assign
i
Insert Send Port Assign
i
Insert Return Port Assign
i
Insert ON/OFF
i
Direct Out Port Assign
Pasting phase parameters
Phase parameters can be set independently for left and right
even for stereo modules.
If the mono/stereo states of the copy source and paste
destinations are different, the following will happen.
o
If the copy source is a mono module and the paste
destination is a stereo module, The copy source phase data
will be pasted to Lφ and Rφ of the paste destination.
o
If the copy source is a stereo module and the paste
destination is a mono module, The copy source Lφ data will
be pasted to φ of the paste destination.
Pasting MODE/IMAGE parameters
MODE/IMAGE parameters shown on the MODULE (SEND/
PAN) screen only exist for stereo input modules. (See “MODULE
(SEND/PAN) Screen” on page 102.)
For this reason, MODE/IMAGE parameters can only be copied
and pasted when both the source and destination are stereo
input modules.
108
TASCAM Sonicview 16/Sonicview 24
