TASCAM Portacapture X8
23
4 - Connections
A-B stereo connection
This enables recording with a wide left–right stereo field.
1.
Connect the mics so that their metallic discs face the same direc-
tion as the touchscreen.
Metallic disc
Metallic disc
2.
Turn their locking rings to fix them in place.
Lock ring
Lock ring
4 - 3 Connecting external mics and other
equipment
Connecting external mics
Connect mics to the XLR or TRS connectors of input jacks 3–6.
Point the mics at the sound source and place the unit in a stable location
where there is little vibration.
When connecting to the XLR jacks, insert the plug until a clicking sound
is made. When disconnecting, pull the plug out while pressing the lock-
ing mechanism.
Example connecting to input jacks 3–4
Mics
After connecting and making INPUT SELECT settings, use the INPUT set-
tings to select MIC or LINE level. (“Making input settings for each input”
on page 27)
NOTE
o
Make phantom power settings when using a microphone that re-
quires phantom power.(see “Using phantom power (PHANTOM)” on
page 27)
o
When connecting a device with unbalanced output, use the EXT IN
jack.
Connecting mics that are compatible with plug-in
power
In addition to the included mics, other mics that are compatible with
plug-in power (3.5mm TRS) can be connected to input jacks 1–2.
Connecting mid-side mics
Mid-side mics can be connected to one input jack pair (3–4 or 5–6).
Connect the mid-side mic mid to input jack 3 or 5 and the side to input
jack 4 or 6.
After connecting them, select the tracks assigned to the jacks they are
connected to using the GENERAL SETTINGS screen > I/O SETTINGS > MS
DECODE> SOURCE item.
See “Mid-side decoding function” on page 70 for details about record-
ing with mid-side mics.