TASCAM iXR
17
In this chapter, we explain how to set some audio applications
for use with this unit.
DAW software settings
Cubasis LE
Find Cubasis LE on the Apple App Store and download it.
See the Cubasis LE manual for information about its settings.
NOTE
Follow these procedures to enable the Cubasis LE input
signal.
•
Tap the Settings icon on the iOS device home screen to
open the Settings app.
•
Scroll down the list of settings on the left side to Cubasis
LE and tap it.
•
When the settings screen opens to the right, turn the
Mic setting on.
Cubase LE
Download the Cubase LE Quick Start Guide from the product
page on the TEAC Global Site (http://teac-global.com/), and refer
to it for instructions about downloading, installing and making
settings.
Other DAW software
When using another DAW, consult its operation manual.
Driver selection according to use
(Windows only)
Set the ASIO driver in a DAW or other application to one of the
following.
iXR
Select this when using a DAW or other application
primarily for recording.
CUT Either ASIO applications or WDM applications can
be used. Both types cannot be used at the same time.
The performance might be improved depending on the
use conditions.
iXR Mixing Driver
Select this when using a DAW or other application
primarily for playback. Both ASIO and WDM applications
can be used at the same time. The output of both ASIO
and WDM applications can be mixed and output to the
iXR.
Windows Media Player
1. Open the OS Control Panel.
NOTE
Open the Control Panel in the following ways.
Windows 10/Windows 8.1
Right-click the Start button at the bottom left of the
screen, and select “Control Panel”.
Windows 7
Click the Start button at the bottom left of the screen, and
select “Control Panel” from the Start menu.
2. Double-click Sound in the Control Panel.
NOTE
The Sound icon will be shown if the Control Panel “View by”
is set to “icons”.
3. On the Playback page, right-click “iXR” or “iXR Mixing Driver”,
and click “Set as Default Device” in the pop-up menu that
appears.
When you do this, the green check mark appears next to
“iXR” or “iXR Mixing Driver”.
Screen in Windows 7
NOTE
To use this unit as the recording device, open the Recording
page and use Set as Default Device for Line In iXR.
4. After completing the setting, click the OK button.
5. Launch Windows Media Player, select an audio file and start
playback.
NOTE
•
If you change the setting while Windows Media Player is
running, the software will not recognize that the device has
been changed. In this case, restart Windows Media Player.
•
If you still cannot hear sound after making the settings and
completing the procedures above, restart the computer.
•
If you make this setting, sound will be output through this
unit, but no sound will be output by the computer’s speakers
or headphone jack.
8 – Application Guide
