20
TASCAM HS-P82
Turning the power ON and OFF
Push the
switch on the front panel down to turn the
power ON.
The following Start Up screen appears.
To turn the power OFF, push the
switch on the
front panel down again. A confirmation screen appears to
verify that you want to turn the power OFF. Follow the
instructions on the screen to turn the power OFF.
NOTE
When using an external DC power source or an internal
battery, a voltage of at least 11 V is necessary when starting
up.
Setting the time of the built-in clock
1 Press the
MENU
key on the front panel to open the
MENU
screen.
2 Touch the
SYSTEM
SETUP
button to open the
SYSTEM
SETUP
screen.
3 Touch the
CLOCK
ADJUST
tab to open the screen where
you can set the built-in clock.
4 Touch the item that you want to change, and use the
DATA
dial on the front panel to change the value.
5 Touch the
SET
button, or push the
DATA
dial to
confirm the setting.
NOTE
After purchasing this unit, set the clock before making your
first recording. If you do not set the clock, the time stamps on
recording files will not be correct
3 − Preparation
