manualshive.com logo in svg

Tascam HS-4000, Руководство пользователя

Поделиться
Скачать
Tascam HS-4000 Скачать руководство пользователя страница 35

TASCAM HS-4000

 35

4 – Basic operation

Online function

To output audio from the line output connectors, open the ON 

LINE key cover on the front panel and press the ON LINE key.

The ONLINE key lights when ON. You can also connect a TASCAM 

RC–HS32PD remote controller (sold separately), for example, 

and use its master fader to adjust the level suitably.
When the master fader is at its lowest position, audio will not be 

output from the line output connectors. 
Press the ONLINE key again to turn it OFF. That key becomes 

unlit, and sound ceases to be output from the output 

connectors.
For details about the online function, see “Online functions” on 

page 122.

Recording operation limitations

With this unit, if the total number of files, folders and other items 

in one folder becomes too great, recording to that session will 

be restricted in the following ways. 

 

8

When the total number of items in one folder 

exceeds about 20000

Recording of a new take might not be possible even when 

starting recording from a stopped state. When a project or 

session is loaded, recording to that session might not be 

possible. In these cases, the following pop-up message appears.

In this case, the remaining recording time indicator for the 

currently selected CF card on the Home Screen shows Rec Limit.

CAUTION

The total number of items inside one folder includes 

files and folders not created by this unit. Management 

files, system files and other files and folders that are not 

ordinarily visible are also included in the total.

Содержание HS-4000

























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды