54
TASCAM DR-40
4 – Recording
In this mode, each time you record with the same playback
file, the number in item
2
increases by one for the name of
each new file.
1
: Set with the
WORD
item on the
FILE NAME
screen
2
: Recording file base number
3
: “S” is the source file and “V” is the virtual file
4
: Assigned channels (“12” is channels 1/2 and “34” is
channels 3/4)
6
: Backup number in the virtual file
NOTE
• In OVERDUB SEPARATE mode, the base number of the
recording file and “S12” are added to the file name of the
playback file.
• If writing files copied from elsewhere is not possible, enable
writing using a computer, for example.
CAUTION
If you overdub record in separate mode a file recorded by this
unit with dual recording, its file name will change and it will
no longer be handled as a dual recording file. (See “Playback
of files recorded using dual recording” on page 78.)
Recording automatically (AUTO REC)
This function allows the unit to respond to input sound levels
and start and pause recording, as well as set marks and create
new files, for example.
1 Press MENU to open the
MENU
Screen.
2 Use the + or – button to select
REC SETTING
, and press
the ENTER/MARK or
/
button.
REC SETTING
screen appears.
3 Use the + or – button to select the
MODE
and press the
ENTER/MARK button or
/
button.
4 Use the + or – button to set the
MODE
of the
AUTO REC
setting.
OFF
(Default): Off
NEW FILE
: Records and pauses automatically
MARK
: Sets marks automatically during recording