TASCAM DR-40
47
4 – Recording
12 Use the + and − buttons to set the backup recording
input level control function.
LVL CTRL
Explanation
OFF (default value)
No level control
PEAK REDUCTION
If the input sound is too loud, the input level
is automatically lowered to a suitable level.
This function makes handling difficult input
level settings easier.
AUTO LVL
Low input levels are raised and high input
levels are lowered automatically, making this
useful for recording meetings, for example.
LIMITER
This prevents distortion if the input level
becomes too loud suddenly. This is useful
for live performances and other recordings
when extreme volume changes occur.
13 Press the
.
button to return to setting item
selection.
14 If using MS mics, use the + and – buttons to select
MS
DECODE
, and press the ENTER/MARK or
/
button.
Use the + and – buttons to set
MS DECODE
to
ON
(default
value:
OFF
).
15 When setting is complete, press the
(HOME) [
8
]
button to return to the Home Screen.
Starting dual recording
Press the RECORD [
0
] button to start dual recording.
During dual recording, the recording screen appears as
follows.
On the recording screen, the top meter shows the main
recording input level and the bottom meter shows the
backup recording input level.
