26
TASCAM DR-10L Pro V1.00
7 - Various settings
7 - 4 GENERAL SETTINGS
Setting the automatic power off function
When using batteries, this function will turn the unit off automatically if
it is stopped and no operation has occurred for about 10 minutes. This
function can be turned on or off.
Setting items (default value underlined)
OFF / ON
1.
When the Home Screen is open, press the MENU button to open
the Menu Screen.
2.
Use the
.
[
j
] and
/
[
k
] buttons to select 15: POWER SAVE,
and press the
7’9
[ENTER] button.
3.
Use the
.
[
j
] and
/
[
k
] buttons to select the setting item,
and press the
7’9
[ENTER] button.
NOTE
When using USB bus power, the display will not become unlit.
Instead, the following screen will appear.
If the USB cable is disconnected, the unit power will turn off and the
display will become unlit.
Setting the backlight
This setting controls the brightness of the display backlight.
Setting items (default value underlined)
ALWAYS / 5sec / 30sec
ALWAYS: Backlight always stays on
5sec: Backlight stays on for 5 seconds after last operation
30sec: Backlight stays on for 30 seconds after last operation
1.
When the Home Screen is open, press the MENU button to open
the Menu Screen.
2.
Use the
.
[
j
] and
/
[
k
] buttons to select 17: BACKLIGHT,
and press the
7’9
[ENTER] button.
3.
Use the
.
[
j
] and
/
[
k
] buttons to select the setting item,
and press the
7’9
[ENTER] button.
