Tascam DR-100MKIII, Справочное руководство

Страница: 17 / 52

TASCAM DR-100MKIII
17
3 – Preparation
Setting the date and time
You can set the unit to automatically assign file names based
on the date and time of the built-in clock. (See “Setting the file
name format” on page 36.)
By setting the clock in advance, the recording date and time can
be added to files accurately.
The first time you turn the unit on after purchasing it and
whenever the date and time has been reset, the
DATE/TIME
screen where you can set the date and time will open. You can
also change this setting with the
SYSTEM
screen
DATE/TIME
item.
1. Turn the wheel to move the cursor to the item (year/month/
day/hour/minute/second) you want to set, and press the
ENTER/MARK button.
2. Turn the wheel to change the value, and press the ENTER/
MARK button.
3. Turn the wheel to move the cursor to
OK
, and press the
ENTER/MARK button to confirm the setting.
NOTE
The date and time will be reset to the default if the unit does
not receive power from the built-in battery, AA batteries or
an external power supply for a few minutes.
Preparing an SD card for use
The following message appears if an unformatted card is
installed in the unit when it is turned on.
In order to use an SD card in this unit, you must format it first.
Press the ENTER/MARK button to format the card.
CAUTION
•
Formatting will erase all the data on the SD card. Back up to
a computer, for example before formatting a card.
•
When formatting a card, the unit should be powered by an
external power supply or batteries with sufficient remaining
power.
NOTE
You can also use the
SYSTEM
screen
MEDIA FORMAT
item to
format a card. (See “Formatting SD cards” on page 43.)
Preparing the recording inputs
You can select the input source from multiple options according
to the application. Settings must be made according to the
input source used. (See “Setting recording input sources” on
page 21.)
Recording with the built-in mics
8
Using the built-in directional mics (UNI MIC) to
record
This is suited for instrumental performances, bands and other
live recordings as well as field recordings, for example.
Point the built-in directional mics (UNI MIC) at the sound source
and place the unit in a stable location where there is little
vibration.
8
Using the built-in omnidirectional mics (OMNI MIC)
to record
This is suited for recording meetings and other situations where
you want to capture all the sound in a large space. Place the unit
in a stable location where there is little vibration.
Recording with connected mics
Connect mics to the MIC/LINE IN XLR or TRS jacks.
Connect a stereo mic to the EXT IN jack.
Point the mics at the sound source and place the unit in a stable
location where there is little vibration.