48
TASCAM DR-05X
10 – Tuning an instrument
This unit has a built-in tuner. By inputting sound from a
musical instrument, you can tune it accurately while viewing
the tuning meter shown in the display.
Using the tuner
Setting the tuner
1.
Press the MENU button to open the
MENU
screen.
2.
Use the + and – buttons to select (highlight) the
OTHERS
menu item, and press the
7
button to open the
OTHERS
menu.
3.
Use the + or − button to select
TUNER
, and press the
7
button.
The
TUNER
screen will open.
The
TUNER
screen contains a
CALIB
option to set the
frequency of A. Press the
.
or
/
button to
decrease or increase the fundamental frequency.
Setting range:
435Hz
-
445Hz
(in 1 Hz increments, default:
440Hz
)
NOTE
When the
TUNER
screen is open, press the
7
button to
reverse the screen orientation.
Tuning a musical instrument
1.
Open the
TUNER
screen, and sound a note near the unit.
The closest pitch name will be shown above the center
of the meter.
2.
Tune the instrument so that the target pitch name
appears and the center of the tuner lights.
A bar appears to the left or right of center if the sound is
lower or higher than the target pitch. The bar becomes
longer the more the input pitch differs from the target
pitch.
Adjusting the input level for tuning
1.
Press the QUICK button to switch
CALIB
to
INPUT LEVEL
in the bottom of the
TUNER
screen.
2.
Use the
.
or
/
button to adjust the input level.
During adjustment, a pull-up with meters showing the
input level will appear at the bottom of the display.
Adjustment is the same as explained in "Adjusting the
Содержание DR-05X
Страница 1: ...D01353820B REFERENCE MANUAL DR 05X Linear PCM Recorder...
Страница 19: ...TASCAM DR 05X 19 3 Preparation...
