18
TASCAM DP-004
2–Quick Start Guides
4 Use the
DATA
wheel keys to select
SONG001
and press
F2 (EXEC)
to load this song that does not have any
recordings in it yet.
The
SONG
menu screen reopens.
5 Press the
HOME
key to return to the Home Screen.
Setting the guitar as track 1 recording source
The default settings are for the
INPUT A
channel to be
the recording source for tracks 1 and 3 and for the
INPUT B
channel to be the recording source for tracks
2 and 4.
In “Connecting and setting the input sources” above,
we made a guitar the input source for the
INPUT A
channel and a built-in mic (
MIC B
) the input source
for the
INPUT B
channel. Therefore, the guitar is
already set to record to tracks 1 and 3 and
MIC B
is
ready to record to tracks 2 and 4.
As a result, there is no need to change the input
channel assignments to record the guitar to track 1
in this example. See “Adding another recording (1)”
on page 21 and “Adding another recording (2)” on
page 22 for how to change track recording sources.
Adjusting the input level and monitoring
Use the
INPUT A
channel
LEVEL
knob to adjust the
guitar input level.
Set the
LEVEL
knob so that the
INPUT A
channel
OL
indicator does not light even when the loudest sound
to be recorded is input. If the indicator continues to
light even when the
LEVEL
knob is turned down, the
guitar signal itself is too loud. In this case, lower the
output level on the guitar.
OL indicator
When you play the guitar, its input level is shown by
the
A
meter on the screen.
