Tascam Digital Portastudio DP-24 Скачать руководство пользователя страница 80

Страница: 80 / 108

TASCAM DP-24

13 - Exchanging Data with a Computer

By connecting this unit to a computer using the included

USB cable, you can backup song data from an SD card

in the unit to a computer and restore backed-up song

information. In addition, you can export track files and

stereo master files from songs to the computer, as well as

import audio files from the computer to the unit.
Backed up data can be restored to a different DP-24 unit

than the one that created it. In other words, files can be

freely exchanged between DP-24 units, making it easy to

add additional recordings or mix existing recordings in a

different location.

CAUTION

If you want to remove an SD card from this unit and back

up its data on a computer using a card reader, always turn

off the unit's power before removing the card.

NOTE

In this chapter, "computer" refers to a Windows or

Macintosh personal computer connected to this unit. (See

"Operating system requirements" on the right column.)
The following types of data can be transferred from this

unit to a computer.

Entire songs

You can transfer the data for an entire song from the

unit's

MUSIC

folder to a computer. This operation is called

"backup". In addition, data backed up on a computer can

be transferred to the

MUSIC

folder, and then restored as

song file. This operation is called "restore".

WAV format tracks

Export specified track files as WAV files to the

AudioDepot

folder of the SD card. In addition, you can import specified

track files by storing WAV files from a computer to the

AudioDepot

folder beforehand.

In other words, the data transfer between the computer

and track files is carried out through the

AudioDepot

folder.

Master file

A master file created on this unit can be transferred to

a computer as a stereo WAV file (from the "Song name"

folder inside the

MUSIC

folder).

Only export is possible.

Operating system requirements

You can connect this unit to computers with the following

operating systems.

Windows

Windows XP, Windows Vista, Windows 7

Mac OS X

Mac OS X 10.2 or later
When this unit is connected to a computer, the computer

recognizes it as a removable disk. There is no need for a

special driver.

NOTE

Data transfer between this unit and a computer occurs at

USB 2.0 speed (maximum). Data can still be transferred if

the computer connection is USB 1.1, but it will be slower.

In addition, to assure USB 2.0 speed, use a cable that

meets USB 2.0 standards.

Connecting to a computer

When connected via USB, this unit's record, playback and

other recorder operations cannot be used.
To connect with a computer, connect the USB port on the

rear panel of the unit with a USB port on the computer

using a mini-B-type USB 2.0 cable.
It does not matter whether you turn the unit's power ON

before or after the USB connection is made.
When this unit is ON, enable the USB connection in the

USB

item of the

screen.

The currently loaded song is saved before the USB

connection becomes effective. When connected, the

following screen appears on the display.

After making a USB connection, you must turn the power

on and enable the USB connection in the

USB

item of the

screen.

This unit appears as an external drive named

DP-24

on the

computer's display.
Clicking on the

DP-24

drive will display the

MUSIC

UTILITY

and

AudioDepot

folders.

CAUTION

Be sure to use the included TASCAM PS-1225L AC

•

adapter to supply power to this unit. Power cannot be

supplied to this unit via USB.

Содержание Digital Portastudio DP-24













































































































Результаты поиска

Содержание Digital Portastudio DP-24

Отзывы:

Похожие инструкции для Digital Portastudio DP-24

Бренды по названию

Популярные бренды

Tascam Digital Portastudio DP-24, Руководство пользователя

Результаты поиска

Содержание Digital Portastudio DP-24

Отзывы:

Похожие инструкции для Digital Portastudio DP-24

Бренды по названию

Популярные бренды