TASCAM CD-A550MKII
39
Using the TAPE EDIT function
Using the TAPE EDIT function, this unit can follow
an automatically prepared program and dub a CD
according to the tape length.
With the TAPE EDIT function, starting with the first
track, CD tracks that total less than the length of the
tape side are recorded in order to the A side of the tape.
Then, recording continues from the next track in order
to the B side.
1 When CD playback is stopped, press the
TAPE EDIT
key on the remote control to enter TAPE EDIT
mode. The main display appears as shown below.
NOTE
You can also select the TAPE EDIT menu item to enter
TAPE EDIT mode.
2 Use the
–
/
+
keys on the main unit or the remote con-
trol to select the length (in minutes) of the tape being
used.
Options: 30 (default), 46, 54, 60, 80, 90, 120
CAUTION
You can select “120” (for a 120-minute tape) when using
the TAPE EDIT function, but use of tapes longer than 90
minutes with this unit is not recommended. (See “Types
of cassette tapes that are not recommended for use with
3 Press the
ENTER
key on the main unit or the remote
control.
If a program has not already been set, this unit
automatically creates a program to fit the length of
the tape.
If a program has already been set, “
OVERWRITE?
”
appears in the main area of the display.
Press the
ENTER
key again to discard the current
program and automatically create a program to fit
the length of the tape.
Recording from the middle of a tape
1 Set the tape at the position from where you want to
start recording.
2 Press the
RECORD
key on the main unit or the
remote control to make the unit record ready.
REC
and
π
appear on the display.
3 Press the
CD DUB
key on the main unit or the
remote control. Dubbing in the set recording direc-
tion begins from that position.
7 – Recording Cassette Tapes
