background image

TASCAM CD-A550MKII

 29

5 – Playing Back CDs

last track is reached. If repeat playback is turned ON 

when playback is stopped, it begins when the 

CD PLAY

 

key is pushed. Press the 

REPEAT

 key on the main unit or 

the remote control again to turn repeat playback OFF 

(

REPEAT

 disappears from the screen). 

NOTE

The repeat function ON/OFF setting is retained even if 
the power is turned OFF. 

A–B repeat playback 

Repeat playback of a selection of a track (A–B) is 

possible. 

1  During playback or when paused, press the remote 

control 

A–B

 key at the point where you want to set 

the start point (A) for the repeat playback selection. 

REPEAT

 and 

A–

 appear on the display and 

B

 blinks. 

NOTE

If you press the REPEAT key, the repeat playback start 
point (A) is canceled and “REPEAT” and “A–” disappear 
from the display. 

2  Press the remote control 

A–B

 key again at the point 

where you want to set the end point (B) for the 

repeat playback section. 

REPEAT

 and 

A–B

 appear on the 

display, the repeat section (A–B) is confirmed and 

A–B repeat playback begins. 

NOTE

The A–B repeat playback section cannot span more than 
one track. 

 

ª

Stopping A–B repeat playback 

  Press the remote control 

A–B

 key or the 

REPEAT

 key. 

REPEAT

 and 

A–B

 disappear from the display and A–B 

repeat playback stops. 

NOTE

•  If A–B repeat playback is stopped during playback, 

the track continues playing past the B point. 

•  Press the CD STOP key to stop CD playback and cancel 

the designated repeat section (A–B). 

Pitch control 

This unit can change the pitch (sound frequency and 

playback speed) during CD playback (pitch control 

playback). 
Follow the procedures below to use pitch control 

playback. 

1  Press the 

PITCH CONTROL

 key on the main unit to 

turn pitch control playback ON. The indicator next 

to the 

PITCH CONTROL

 key lights. 

2  Use the 

CD PITCH

 knob on the main unit to adjust 

the pitch. You can raise or lower the pitch by up to 

12.5%. 

 

ª

Turning pitch control playback OFF 

  Press the 

PITCH CONTROL

 key on the main unit 

again to turn pitch control playback OFF. 

The 

PITCH CONTROL

 indicator turns off. 

CAUTION

•  During playback, turning pitch control playback 

ON or OFF might cause the playback sound to skip 
momentarily.  

•  Using pitch control playback with a data CD (MP3, 

WAV) sometimes causes the playback sound to skip.

Auto cue function (audio CDs only) 

If the auto cue function is ON, when a track is selected, 

the silence at the beginning of the track is skipped 

and the unit pauses at the position where the “signal” 

actually starts in the track. This allows sound to be 

heard immediately after playback is started. 

NOTE

•  The auto cue function cannot be used with data CDs. 
•  When the auto cue function is ON, even if a track 

is selected during playback, playback pauses at the 
position where the “signal” actually starts after the 
track is selected. 

You can also set the audio signal detection threshold 

level auto cue level) for use with the auto cue function. 

In short, this unit recognizes signals above the auto cue 

level as “signal” and ignores any signal below the auto 

cue level as “silence.” 
Follow the procedures below to use the menu to turn 

the auto cue function ON and OFF and set the auto cue 

level. (See “Using the menu” on page 16 for details 

Содержание CD-A550mkII

















































Отзывы: