Tascam CD-500, Руководство пользователя

Страница: 21 / 40

TASCAM CD-500/500B
21
5 – Operation
Loading discs
Inserting a disc
Hold the disc with its label side up and insert it part way
into the disc slot. Push the disc in a little further and, just
before it disappears, it should automatically be pulled
into the player. After a disc is loaded, the player will read
its information. If it is an audio CD, the display will show
the total number of tracks and total playback time. If it is
a data CD, the display will show the total number of tracks
in the current directory.
CAUTION
You cannot load a disc when the power is off.
•
If the disc becomes caught or is otherwise difficult
•
to push, do not force it in. Press the EJECT button
and remove the disc once before trying to reinsert it.
(Forcing the disc into the player could damage the disc
or even break the player.)
If a disc other than an audio CD is inserted or a disc is
•
inserted upside down, it will automatically be ejected.
8-cm CDs cannot be used with this unit. If an 8-cm CD
•
is inserted, it will automatically be ejected. If it is not
automatically ejected completely, press the
EJECT
button.
Ejecting a disc
Press the
EJECT
button on the player or the remote to
eject the disc part way. Pull the disc out the rest of the
way by its edges.
CAUTION
The EJECT buttons on the player and the remote do not
function when the player’s power is off.
Eject block function
The eject block function allows you to disable the
operation of the
EJECT
buttons on the player and the
remote during playback and when paused in order to
prevent playback from being interrupted accidentally by
the pressing one of these buttons.
To turn the eject block function on, set the
02 EJECT
menu item to
BL
.
NOTE
The eject block function on/off setting is maintained even
when the player’s power is turned off.
Playing back a CD
The following procedures assume that the necessary
connections have been completed, the player’s power has
been turned on and a CD (audio or data) has been loaded.
To start playback, press the
Á
(play) [REPEAT] button on
the player or the
Á
PLAY button on the remote.
Stopping playback
Press the
ª
(stop) [INTRO CHECK]
button on the player
or the
ª
STOP
button on the remote.
Pausing playback
Press the
π
(
pause) [JOG]
button on the player or the
π
PAUSE
button on the remote.
To restart playback, press the
Á
(play) [REPEAT]
button
on the player or the
Á
PLAY
button on the remote.
NOTE
In this manual, unless stated otherwise, explanations
assume that continuous playback mode is enabled. (See
“Playback modes” on page 23.)
Selecting a track
You can move (skip) to the previous or next track, or you
can select a track directly by its track number.
Skipping to the next or previous track
Press the SKIP
Â
/
¯
[INDEX/DIR SEARCH] button
on the player or the SKIP
Â
/
¯
button on the
remote to select a track. What happens after you use SKIP
buttons to select a track depends on whether the auto-
cue function is on or off. (See “Auto-cue function” on page
24.)
When stopped
If the auto-cue function is off, playback starts after the
track is selected.
If the auto-cue function is on, playback pauses at the
instant when sound begins in the track. To start playback
after this, press the
Á
(play) [REPEAT] button on the
player or the
Á
PLAY button on the remote.
During playback
The selected track will start playing back.