Tascam 24, Руководство пользователя

Страница: 18 / 164

18
TASCAM Model 24
1 – Introduction
About SD cards
This unit uses SD cards for recording and playback.
This unit can use SD cards that are Class 10 or higher and com-
patible with SD, SDHC or SDXC standards.
A list of SD cards that have been confirmed for use with this unit
can be found on our web site. Please access to a product page of
this product from the TEAC Global Site ( http://teac-global.com )
to find the list or contact the TASCAM customer support service.
Precautions for use
SD cards are delicate media.
In order to avoid damaging SD cards, please take the following
precautions when handling them.
0
Do not leave them in extremely hot or cold places.
0
Do not leave them in extremely humid places.
0
Do not let them get wet.
0
Do not put things on top of them or twist them.
0
Do not hit them.
0
Do not remove or insert them during recording, playback,
data transmission or other access.
0
When transporting them, put them into cases, for example.
SD card write protection
This unit writes track information to the media in order to im-
prove operation performance. Since, for example, setting infor-
mation cannot be written to SD cards that are write-protected,
settings will not be retained when the unit is restarted and
performance will be otherwise affected.
Note about formatting
SD cards formatted by this unit are optimized to improve perfor-
mance during recording. Use this unit to format the SD cards to
be used with it. Errors might occur when recording with this unit
using an SD card formatted by a computer or other device.
Bluetooth®
This unit has a built-in Bluetooth audio receiver, and can input
sound played on a computer or portable audio device that
supports Bluetooth (Bluetooth device).
ATTENTION
The Bluetooth function of this unit is not guaranteed to en-
able connection or operation with all Bluetooth devices.
Profiles
This unit supports the following Bluetooth profiles.
0
A2DP (Advanced Audio Distribution Profile)
In order to transfer audio by Bluetooth, the Bluetooth device
must support A2DP.
Even if a Bluetooth device supports the same profiles, though,
its functions might differ according to its specifications.
Codecs
This unit supports the following codecs. It will automatically
select one of them during audio transfer.
0
SBC
0
AAC
The unit will select the appropriate codec to use according to
the codec compatibility of the other Bluetooth device and com-
munication conditions.
NOTE
i
You cannot select the codec to be used by pressing a button,
for example.
i
Due to characteristics of Bluetooth wireless technology,
playback from this unit will be slightly delayed compared to
playback from the Bluetooth device.
Content protection
This unit supports SCMS-T as a form of content protection when
transmitting audio, so it can play protected audio.
Transmission security
This unit supports security functions during Bluetooth transmis-
sion in accordance with the Bluetooth standard specifications,
but it does not guarantee the privacy of such transmissions.
TEAC CORPORATION will bear no responsibility should an infor-
mation leak occur during transmission by Bluetooth.