U s e r M a n u a l M D T 8 0 0 0
| 10
Metal Detector Modes and Settings
BlkS (Black Sand): To activate Black Sand Mode:
1.
Press and release the “TS” button until the cursor highlight’s “BlkS” icon.
2.
While the cursor highlights the “BlkS” icon, press and release the “Mode” button to activate or
deactivate black sand mode. The “BlkS” icon will turn black when Black Sand mode is activated.
Press and Release the “Mode” button again to deactivate it.
St/Salt:
To activate or deactivate Salt Mode and adjust the salinity level:
1.
Press and release the “TS” button until the cursor highlight’s the “St/Salt” icon. Press and release
the “Mode” button to activate salt mode. ‘St’ in black and a number representing the salinity level
will appear in the “St/Salt” icon. Press and release the “Mode” button again to deactivate salt
mode.
2.
While the cursor highlights the “St/Salt” icon, and Salt mode is activated, adjust the salinity level
with “Plus Arrow” or “Minus Arrow” buttons.
Figure 3:
St/Salt icon is highlighted.
Figure 4
:
Salt mode is activated and the salinity level is set to 29
Figure 2:
Black Sand mode is activated
Figure 1:
The
BlkS icon is highlighted
