10
Targus Mobile Docking Station with Video
Connecting the Docking Station to Your
Computer
After installing the docking station software, you are ready
to connect the docking station to your computer. To do this:
1 Connect the supplied AC power adapter to the AC
power jack on the docking station.
2 Connect one end of the USB cable to the docking
station and the other end into an available USB 2.0 port
on your computer.
NOTE: The docking station will not function properly
without the AC adapter plugged into an AC outlet.
Do not connect any devices to the docking station
until the installation is completed.
Installing the Default Device Drivers
Once you connect the docking station to your computer,
the default drivers begin installing for each of the ports.
Some hardware devices may prompt you to install the
drivers.
To install the drivers:
1 Select
Install the software automatically (Recom-
mended)
and click
Next
.
The Found New Hardware Wizard program begins
installing the hardware drivers.
The Completing the Found New Hardware Wizard
screen appears.
2 Click
Finish
and repeat as needed for each device.
3 Restart your computer.
