Material: 128gsm 光粉紙， 4C＋4C，booklet with 2 staples, Open size:
9"W x 10"H
DIECUT
Folding Line
Targus wants to ensure you get the best performance
from your Docking Station. Laptops usually ship with
outdated drivers, updating these drivers will optimize
the performance of your Docking Station.
Visit this website
www.targus.com/us/usb3/setup
and we will guide you through updating the:
Laptop USB 3.0 Host Controller Driver
Laptop Video Card Driver
DisplayLink
™
Video and Ethernet Driver
1
2
3
Features and specifications are subject to change without notice. Microsoft and
Windows are registered trademarks of Microsoft Corporation in the United States and/or other countries.
All trademarks and registered trademarks are the property of their respective owners. ©2014
Targus Group International,
Inc.
IMPORTANT: DO NOT
connect
the Docking Station until you have
updated the drivers on your laptop.
410-2872-001D (ACP76US / AU)
QUICK START GUIDE
UNIVERSAL USB 3.0
SV DOCKING STATION
Contents
·
Targus Universal USB 3.0 SV Docking Station
·
USB 3.0 cable
·
AC power adapter with input cable
·
DVI-I to VGA adapter
Specifications
·
1 x DVI-I port
·
3 x USB 3.0 ports
·
Ports marked with
supports BC 1.2 and iOS device charging (1.5A)
·
Gigabit Ethernet
·
Audio In/Out ports
·
Security lock slot
·
5V 4A AC adapter
·
USB 3.0 cable
Tec
hnical Support
For technical questions, please visit:
·
US
Internet: www.targus.com/support.asp
Telephone: 877-482-7487
·
Australia
Internet: www.targus.com/au
Email: [email protected]
Telephone: 1800-641-645
·
New Zealand
Telephone: 0800-633-222
Three years warranty
1. Targus warrants to the original purchaser that its products are free from defects in materials and workmanship for
thr
ee years
. This warranty is limited to defects, materials and workmanship. 2. The benefits to the consumer given by
the warranty are in addition to other rights and remedies of the consumer under law in relation to the goods to which
the warranty relates. 3. The warranty is given by (i) Targus Australia, (ii) Targus Australia’s
business address is: 117-
119 Bowden Street, Meadowbank, NSW 2114 Australia, (iii) Targus Australia’s telephone number is 1800 641 645,
Email: [email protected] (iv) To make a warranty claim for goods purchased in New Zealand, the telephone number
is: 0800
633 222, or the goods may
be returned to the
supplier in New Zealand. 4. What the purchaser must
do to
entitle the purchaser to claim warranty:- (i) The purchaser must call the telephone number for Australia or New Zealand
set out
above, (ii)
The purchaser
must provide
the purchaser’s
name, daytime
contact number,
business hours
delivery
address, the Targus model number on the product, date and place of purchase with receipt for purchase if required,
and describe the fault condition. 5. What Targus must do:- (i) Targus will provide the purchaser with store return
information or a return authorisation so that the purchaser may return the product for warranty inspection, (ii) If after
inspection Targus finds the product is defective in materials or workmanship, Targus shall replace (or repair) the
defective product at the discretion of Targus and ship the product from Targus warehouse at its expense within three
business days (Monday to Friday excluding public holidays) of receiving the returned goods. If the product is no longer
available Targus reserves the right to replace with the nearest corresponding product of no lesser quality, (iii) Targus
will bear the cost of return delivery to the purchaser regardless of the inspection test result. The purchaser must bear
the cost of the delivery to Targus. There is no charge for inspection. 6. Our goods come with guarantees that cannot
be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and
for compensation for any other reasonable foreseeable loss or damage. You are also entitled to have the goods
repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
7. Please note: (i) Features and specifications of all Targus products are subject to change without notification, (ii) In
some instances: Goods presented for repair may be replaced by refurbished goods of the same type rather than being
repaired. Refurbished parts may be used to repair the goods, (iii) If goods accepted for repair retain user-generated
data: During the process of repair some or all of your stored data may be lost. Please ensure that you have saved this
data elsewhere prior to repair.
Regulatory Compliance
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) This device must accept any interference received, including
interference that may cause undesired operations.
Declaration of Conformity
Hereby, Targus declares that this device is in compliance with the essential requirements and other relevant provisions
of Directive 2004/108/EC.
System Requirements
Hardware
·
PC with an Intel
®
Pentium
®
processor or equivalent
·
USB port
·
AC power outlet
Operating System (any of the following)
·
Microsoft Windows
®
7 or Windows
®
8 or Windows
®
8.1 (32/64-bit)
·
Mac OS
®
X v10.6.8, 10.7.5, or 10.8.3
·
Mac OS
®
X v10.6.8 or later
FCC Statement (T
ested to Comply)
This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of
the FCC
Rules. These limits
are designed to provide reasonable protection
against harmful interference
in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy and if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference
to radio
or television
reception, which
can be
determined by
turning the
equipment off and
on, the
user is
encouraged
to try to correct the interference by one or more of the following measures:
·
Reorient or relocate the receiving antenna
·
Increase the separation between the equipment and receiver
·
Connect the equipment into an outlet on a circuit different from the one that the receiver is connected
·
Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not authorized by the party responsible for compliance could void the user’s authority to
operate this product.
