Tarana Wireless, Inc. ©2021. All rights reserved.
RN Installation Guide vIG_RN_CBRS_2021-08
—
6
Regulatory Information
Compliance
Safety
•
IEC62368-1, Second Edition, Rev. February
26, 2014 and EN 62368-1: 2014, Second
Edition, + A11:2017, Audio/Video,
Information and Communication
Technology Equipment
•
IEC 60529, Edition 2.2 - 2013-08
•
IEC/EN 60950-22
Radio Approvals
•
FCC Part 96
EMI and
susceptibility
•
FCC 47 CFR FCC Part 15 Subpart B Class B
Responsible party: Tarana Wireless, Inc.
590 Alder Drive, Milpitas, CA 95035
Deployment in the US
—
FCC Statement
This product must be professionally installed.
This device complies with FCC Part 15 rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Modifications not expressly approved by Tarana Wireless Inc. could void the
user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the FCC limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment.
This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in
a residential area is likely to cause harmful interference in which case the user
will be required to correct the interference at his own expense
.
This device complies with FCC RF exposure limits. This equipment should be
installed and operated with a minimum distance of 63 cm (24.8 in.) between the
radiator and user. This transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter.