Product Description
MECps
- 9 -
1.5
Important Notes
Please read carefully before first use and installation:
1.5.1
Installation and Commissioning
•
In the case of damage (at storage, transport) no repairs may be carried out by
unauthorized persons
•
After connection to the KNX bus system, the device works with its default settings
•
The device may only be installed and put into operation by a qualified electrician or
authorized person
•
For planning and construction of electric installations the appropriate specifications,
guidelines and regulations in force of the respective country have to be complied
•
For configuring, use the ETS (or ETS Inside)
1.5.2
Mounting and Safety
•
For mounting use an appropriate equipment according to IEC60715
•
Installation only in distribution boards and enclosed housings
•
Installation only on a 35 mm DIN rail (TH35)
•
Terminals and metal parts under current must be completely covered against touching
•
Contact protection must be provided through the control cabinet
•
It must be not possible to remove the cover without aid of a tool
•
Connect the KNX bus line as for common KNX bus connections with a KNX bus cable, to be
stripped and plugged into a KNX TP connector
•
Do not damage electrical insulations during connecting
•
Installation only in dry locations
1.5.3
Maintenance
•
Accessibility of the device for operation and visual inspection must be provided
•
The housing must not be opened
•
Protect the device from moisture, dirt and damage
•
The device needs no maintenance
•
If necessary, the device can be cleaned with a dry cloth
