ETS Database
MECip
SECURE
- 27 -
5.2
Main Line (IP)
Setting “transmit all” is intended only for testing use. Please do not use
this setting for
normal operation.
Figure 15: Main Line (IP) Tab Parameters
Table 10: Main Line (IP) Tab Parameter Settings
ETS Parameter
Settings
[Default Parameter]
Comment
Telegram routing
(Main line -> Subline)
Group: filter, Physical: block
Group and Physical: filter
Group: route, Physical: filter
Group and Physical: route
configure
[Group and Physical: filter]
Routing of Physical Telegrams and
Group Telegrams can be set to ‘block’
(no routing), ‘filter’ (telegrams are routed
according to filtering) and ‘route’ (all
telegrams are transmitted). To set
telegram routing different as available
here, use ‘configure’.
Group telegrams:
Main group 0…13
transmit all (not recommended)
block
filter
[filter]
Filtering of Group telegrams (with main
groups
0…13)
can be configured to
route all telegrams, no telegrams, or
only telegrams entered in the filter table.
Group telegrams:
Main group 14…31
transmit all (not recommended)
block
filter
[filter]
Filtering of Group telegrams (with main
groups 14…31) can be configured to
route all telegrams, no telegrams, or
only telegrams entered in the filter table.
Physical telegrams
transmit all (not recommended)
block
filter
[filter]
Filtering of Physical telegrams can be
configured to route all telegrams, no
telegrams, or only telegrams according
to their Individual Address.
