TapFlo Sanitary Series, Руководство Iom

Страница: 20 / 50

3. MAINTENANCE
Tapflo sanitary pump series
20
3.5. T30 – Disassembly of the pump
The numbers put in brackets, refer to the part numbers in the spare part drawings and spare
part lists in chapter 5 “SPARE PARTS”.
3.5.1. Before the disassembly procedure
Be sure to drain all liquid from the pump. Cleanse or neutralize the pump thoroughly.
Disconnect the air supply and then the suction and discharge connections.
3.5.2. Disassembly procedure
Fig. 3.5.1
Unscrew and remove two tri-clamps [138] connecting
the outlet manifold [132] to the housings [11].
Fig. 3.5.2
Take off the outlet manifold [132] and remove the valve
balls [23] and sealing [18].
Fig. 3.5.3
Unscrew and remove two tri-clamps [138] connecting
the inlet manifold and stand [131] to the housings [11].
Fig. 3.5.4
Take the centre block [12] and housing [11] assembly of
the inlet manifold and stand. Remove the valve balls [23]
and sealing [18].