TaoTronics TT-BH051, Руководство пользователя

Страница: 8 / 32

CLEANING AND MAINTENANCE
1. Clean the earbuds and the charging case on a regular basis.
2. Use dry and soft cotton cloth to wipe the unit.
Note: Do not insert anything into the product.
3. Keep away from sharp objects to avoid scratches.
4. Put the unit in a dry and shady place if it is to be idle for a long time.
5. Do not clean the product with detergent or chemicals.
No. Problem Solution
Failed to turn on the
earbuds
Earbuds low battery, please charge them
1
Failed to charge the
earbuds
• Place the earbuds into the charging
case properly
• Make sure the charging case is fully charged
2
Can’t charge the
charging case Make sure the charging cable is intact
and plugged in properly
3
Can’t find
“ TaoTronics Duo
Free Pro” in the
Bluetooth device list
The earbuds reconnected with previously
paired device automatically:
• Deactivate the Bluetooth function of
previously paired device or clear
“TaoTronics Duo Free Pro” from its
Bluetooth device list, and then
search again
4
TROUBLESHOOTING
No. Problem Solution
7 Poor sound quality
• Wear the earbuds properly and keep
them close to each other.
• Place the connected device close to the
earbuds or remove the obstacles
between them
• Clear the debris on the earbuds
8 Unstable connection
• The effective distance may shorten with
obstacles in the way
• Turn off other Bluetooth devices to
decrease the interference
9
Can’t hear the other
party during a phone call Set the volume to higher level
10
The other party can’t hear
your voice during a
phone call Free the built-in microphone of any
covers
Touch Control of the
earbuds is unresponsive
Place the two earbuds into the charging
case and cover the lid, disconnect the
Bluetooth connection. Uncover the lid to
turn on the earbuds and pair again.
11
WARRANTY AND SERVICE
If any problems occur, please contact the TaoTronics Customer Care Centre
via the contact information listed in this User Guide.
6
No sound in one of the
earbuds in couple
earbuds mode
Place both earbuds back to the charging
case then take them out, they will pair
with each other automatically. If pairing
failed, restore them back to the factory
settings as instructed in the “Clear Pairing
List” section
Failed to pair the
earbuds with your
device
• Turn on the device and activate its
Bluetooth function before pairing
• Bring the earbuds into pairing mode
as instructed in the “Pairing” section
5
Function Operation Voice Prompt
Successfully paired
with your device
Bluetooth out of
Range / Failed to
pair with your device
/
/
Connected
Disconnected
Note:
Only when you are wearing the earbuds can you hear the voice prompt.
01 03 05 07
09 11 13 15 17
19 21 23 25 27
29 31 33 35 37
39 41 43 45 47
49 51 53
02 04 06
08
10 12 14 16 18
20 22 24 26 28
30 32 34 36 38
40 42 44 46 48
50 52 54