IG-21-2-015-A
19
5.
Appendix
5.1 Security
The EDGE EC40 device security is provided by four mechanisms:
1.
Connection to the Cloud-based components via HTTPS, with the servers public certificates held on the EDGE EC40 device.
2.
Authentication of the device by the Taoglas Insights Platform, with the unique and individual private key held securely in a
cryptographic coprocessor.
3.
Whitelisting of the domains to which the EDGE EC40 APN can connect – Taoglas Insights and Taoglas Insights Platform and
NTP servers only.
4.
The device periodically reports its configuration hash (security), firmware versions, and certificate bundle version to the Taoglas Insights
Platform. A report is sent each time a device is powered up, or when the configuration, certificate,or firmware has changed.
5.2 Safety and Regulatory Requirements
Warning:
Failure to follow instructions could increase risk to safety and noncompliance with regional laws and regulations.
Warning:
DO NOT SHORT CIRCUIT, DISASSEMBLE, CRUSH, PENETRATE OR INCINERATE.
BATTERY MAY LEAK OR EXPLODE IF HEATED ABOVE 100 °C (212 °F)
.
Warning: HAZARDOUS AREA WARNING
: This instrument has not been designed to be intrinsically safe for use in areas classified as hazardous
locations. For your safety, DO NOT use it in hazardous (classified) locations.
Caution:
In the case of an emergency, degraded performance will occur if wireless reception is inhibited.
Note:
The device has an operating range between -20 and +60 degrees Celsius (-4 to 140 Fahrenheit).
The device can be safely charged in an ambient temperature range of between 0 – 40 degrees Celsius (32-104 degrees Fahrenheit).
The device can be charged with a 5 V/0.5 A power supply and Micro USB Cable.
Note:
a)
Do not disassemble or open crush, bend or deform, puncture or shred
b)
Do not modify or remanufacture, attempt to insert foreign objects into the battery, immerse or expose to water or other liquids,
expose to fire, explosion or other hazard.
c)
Only use the battery for the system for which it is specified
d)
Only use the battery with a charging system that has been qualified with the system per CTIA Certification Requirements for Battery System
Compliance to IEEE 1725. Use of an unqualified battery or charger may present a risk of fire, explosion, leakage, or other hazard.
e)
Do not short circuit a battery or allow metallic conductive objects to contact battery terminals.
f)
Replace the battery only with another battery that has been qualified with the system per this standard, IEEE-Std-1725. Use of an
unqualified battery may present a risk of fire, explosion, leakage or other hazard. Only authorized service providers shall replace battery.
(If the battery is non-user replaceable).
g)
Promptly dispose of used batteries in accordance with local regulations
h)
Battery usage by children should be supervised.
i)
Avoid dropping the device or battery. If the device or battery is dropped, especially on a hard surface, and the user suspects damage,
take it to a service center for inspection.
j)
Improper battery use may result in a fire, explosion or other hazard.
Caution:
Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions.
