www.tankscan.com
InHand IR300 Cellular Wi-Fi
Router Setup Instructions
Set up Wi-Fi
Log in to Router
1
7
7
8
9
10
11
12
13
8
14
2
3
4
5
6
Connect an Ethernet cable into WAN/LAN1 Ethernet port on router. Connect
other end to a PC.
Plug in router’s power cable.
Wait until Cellular indicator light begins to flash.
Open an internet browser and go to
192.168.2.1
to open login window
Enter
adm
for username.
Enter
123456
for password.
Click on
Network
tab and select
WLAN
.
Click on
Enable
checkbox.
Following Wi-Fi settings are suggestions and can be modified as desired.
For
SSID
, enter desired Wi-Fi network name.
For
Auth Mode
, select
WPA2-PSK
.
For
Encryption Method
, select
AES
.
For
WPA/WPA2 PSK
, enter desired Wi-Fi password.
When finished, click
Apply
button.
Router will now execute and save setting changes. Once changes are saved,
router can be unplugged and moved to final location.
IMPORTANT: Changes made to Wi-Fi settings (such as changing SSID or password)
after setting up monitor(s) may result in monitor(s) losing connection to router.
Each monitor will then have to be configured again. It is recommended to finalize
any settings prior to installing monitor(s).
1
2
