Set up the Clock
Entering Clock Adjusting Mode
1. Press and hold the ‘Clock’ key on the right display panel for 2 to 3 seconds.
The Clock LCD panel will flash ‘12 Hr’ or ‘24 Hr’ depending on the current display mode.
2. Use ‘Up’ or ‘Down’ key to select either 24 Hr or 12 Hr mode. If 12 Hr mode was selected, the AM
and PM icon will appear on the right corner of clock.
3. Press ‘Clock’ key to confirm.
4. Use ‘Up’ or ‘Down’ key to program the correct hour, and press ‘Clock’ key to confirm.
5. Use ‘Up’ or ‘Down’ key to program the first digit of minute while the first digit of minute is flashing,
press ‘Clock’ to confirm.
6. Use ‘Up’ or ‘Down’ to program the second digit of minute, press ‘Clock’ to confirm.
7. The programmed time will be displayed on the clock LCD.
Note:
After 5 seconds or more of keypad inactivity during this process, the adjusted clock will be
saved automatically.
When you change or re-install the lithium battery, the clock setting will be reset to 12:00 pm. Please follow
the instructions above to reset the clock. Changing the (3) AA batteries will not cause the time setting loss.
Setting to Zero
Zero function enables the user to reset the scale to 0 lb or 0 kg while it is free of objects on
the platform. It is recommended to use this function in the following situations:
• For first time use of the scale.
• Every time the scale has been relocated.
• When the Weight LCD does not show 0 lb or 0 kg while the scale is free of objects on the platform.
1. Remove objects from the platform.
2. Press ‘Zero’ key.
“---” followed by 0.0 lb/0.00 kg/0 lb F will be displayed on the Weight LCD.
The scale will automatically shut off in 20 seconds.
The scale has been set to 0 lb/kg.
7
