Tandem t:slim X2, Руководство пользователя

Страница: 69 / 198

Customer Technical Support:
(877) 801-6901 69
Key Pump Featur
es
2
Chapter 5 – Infusion Site Care and Loading Cartridge
Instructions on How to Install
a Cartridge
If this is the very first time you are load-
ing the cartridge, remove the shipping
canister (which is not for human use),
from the back of the pump.
1. From the Home Screen,
tap
OPTIONS .
2. Tap Load .
During the load sequence, the Tan-
dem Logo is disabled. Tapping it
will not return to the Home Screen.
3. Tap Change Cartridge .
4. Screen will display that all insulin
deliveries will be stopped. Tap
YES to continue.
NOTE: First Time Use
This screen will not be displayed if this is
the first time loading a new cartridge and
you have not started actively pumping.
5. Disconnect the infusion set from
your body and tap
NEXT to
continue.
Z Z
“Preparing for Cartridge” screen
is displayed.
6. Remove the used cartridge.
If needed, place the cartridge
removal tool or the edge of a coin
in the slot at the bottom of the
cartridge and twist to aid in the
removal of the cartridge.
7. Install filled cartridge.
Place bottom of the cartridge at
the end of the pump. Make sure
cartridge is lined up to both
guide tracks.
Push on the circular fill port next to
the cartridge tubing to slide the
cartridge onto the pump.
Tap UNLOCK icon when
completed.
8. Tap NEXT to continue.
Z Z
“Detecting Cartridge” screen
is displayed.
WARNING
DO NOT remove or add insulin from a filled
cartridge after loading onto the pump. This will
result in an inaccurate display of the insulin
level on the Home Screen and you could run
out of insulin before the pump detects an
empty cartridge. This can cause very high blood
glucose, or Diabetic Ketoacidosis (DKA).
After completing the cartridge change,
the pump will automatically prompt you
to fill tubing.