20
21
Display Button: Changing the LCD Display Pattern
There are two LCD display patterns for current readings:
An Alternating Display and A Fixed Display.
Alternating Display:
The LCD display shows all or selected multiple measurement items. Make settings
for measurement items to be displayed via the software.
If the setting has been made so as to display all measurement items, the items will
be shown alternatingly in the following order:
Illuminance (lx, klx) >> UV Intensity (mW/cm²) >> Temperature (°C) >> Humidity (%) >>
Cumulative Illuminance (lxh, klxh, Mlxh) >> Cumulative Amount of Ultraviolet Light (mW/
cm²h, W/cm²h) >>
Fixed Display:
The LCD display shows one measurement item specified by pressing the button
on the Unit.
The factory default setting is an alternating display between
Illuminance and UV Intensity.
Example:
By pressing the button when the
Unit has been set to an Alternating
Display, the LCD display mode will
change to a Fixed Display.
With each pressing of the button
the item for the Fixed Display will
change.
The LCD display mode will change
to an Alternating Display.
About Cumulative Illuminance and Cumulative Amount of
UV Light.
Cumulative Illuminance and Cumulative Amount of UV Light are
numerical values for the total amount measured while recording.
These measurements change each time the LCD is refreshed.
Interval Button: Setting / Checking Recording Interval
During recording or while waiting for a programmed recording to
start via the software, recording interval settings cannot be made
or changed.
The factory default setting for the recording interval is 10 seconds.
Setting the Recording Interval
1.
Press the INTERVAL button until the recording interval
time appears on the LCD display.
2.
There are 15 recording intervals to select from:
1, 2, 5, 10, 15, 20 and 30 seconds / 1, 2, 5, 10, 15, 20, 30 and 60 minutes
EX1: 15 seconds
EX2: 15 minutes
3.
With each pressing of the INTERVAL button the recording
interval time will change. When the desired recording
interval appears, stop pressing the button.
4.
The current measurement readings will return to the
LCD display.
Checking the Recording Interval
By pressing the INTERVAL button during recording or while waiting for
a programmed recording to start via the software, the currently set
recording interval will be displayed.
